Leica FilterView NEW By Photo Equip

Product # FILTERVIEW

SEE SAMPLE PHOTOS (CAMERA, LENS & FILTER PICTURED NOT INCLUDED)

Thanks to FilterView®, Leica M-Series and other rangefinder camera users can now get a real time look at the effect they are achieving with polarizing (or other) filters. You can constantly see the filter effect through the viewfinder, so simply adjust the polarizer and shoot!

Beautifully machined from aircraft alloy heat treated 6061 aluminum (lighter and stronger than brass) FilterView® is finished in durable chip resistant black anodize.

With the Universal Polarizing Filter-M offered by Leica, it is necessary to raise the filter up in front of the viewfinder (completely, for the setting to be correct), adjust the polarization effect, then lower it back in front of the lens (not changing the setting by mistake in the process), reframe the picture, and (finally!) take the picture.

Using FilterView® couldn’t be simpler. A 77mm filter of your choice is screwed into the front element. This combination then screws directly into any lens having 60mm filter threads.  The unique key to FilterView® is the special elastomeric ring, which allows one of the see-thru windows to always be properly positioned in the lower right hand corner of the viewfinder.

Four adapter rings are provided for 55mm, 49mm, 46mm, and 39mm filter thread lenses. Only one ring is used, no need to stack up several steps! Other size adapters can of course be used if needed, alone or in conjunction with those supplied with FilterView®, to fit other size lens threads. 

FilterView® has been found to work well on many cameras besides the Leica-M Series, including the Contax G-Series, Hexar, Hassalblad X Pan & Mamiya 6. 

For other cameras check compatibility by holding a 77mm filter, or 77mm diameter disk cut from cardboard, about 1/4 of an inch out in front of the lens (approximately the amount the front element and an adapter would stack up to). Look to see how much of the filter area is visible in the viewfinder. The other consideration would be if the adapter required to match the lens filter threads is included in FilterView®, or available elsewhere.