Popflash MP-Winder Silver NEW - Rewind Crank For Leica MP, M-A, M2 & M3 Film Cameras

The MP-Winder is now exclusively available from Popflash Photo.

Made in the U.S.A

Includes

• Compression Screw
  
• Allen Wrench
• Cloth Pouch

The instructions that come with Leica's rewind crank read:
"Slight marks from the screw on the rewind knob are unavoidable."

Well, they're not using the MP-Winder with the compression screw!

The included compression screw features a unique soft tip to prevent damage to the camera's rewind knob.

Beautifully machined from aircraft alloy aluminum and stainless steel, the MP-Winder blends elegantly with the camera body. No unsightly gap at the camera's bottom. The original knurled knob is hidden, and undamaged. Rather than being clipped off flat at the back, a counterbored setscrew hole allows for a continuous curve.

Incorporating a very thin wall completely surrounding the rewind knob, the MP-Winder drops on smoothly at installation. Even when raised for rewinding, MP-Winder looks like an integral part of the camera, not an "add on". A crisp diamond knurl on the handle provides an immediate and much more positive grasp.

An undercut design makes telescoping unnecessary. MP-Winder achieves the same low profile as Leica's rewind crank. The lack of telescoping, with its inherent slack, results in a smoother cranking action. Better grasp eliminates the tendency to push the winder down, which could damage the camera body.

Besides the Leica MP and M-A, the MP-Winder should also nicely fit the Leica M2 and M3. The product has been on the market since early 2004, and there has yet to be a report of one that didn't fit. Leica, however, states that their rewind crank fits "most" M2s and M3s, so they must know that some cameras had knurled knobs that were oversized, or some other inconsistency. Should your camera turn out to be one of these rarities, Popflash Photo offers a "no questions asked" guarantee on all our products upon their intact return, so you would only be risking the cost of shipping to try one out.

The MP-Winder has a hard anodized finish and is available in either silver or black.

Insist on an MP-Winder with the compression screw, for your Leica's sake!